COMEUP WINCH – RHINO 8, 24V

SKU: 851224 Category: INDUSTRIAL WINCH

Reliable electric winch for commercial, industrial and severe duty applications.
10 equally positioned pin holes with a ergonomic T-handle make it possible to reposition in 36° increments.
Over-load protector built-in the control box prevents overloading of the winch.
Water-proof remote control with thermometric LED indicator alerts when the motor is over-heated.
U.S. Germany, U.K. France, etc patented mechanical cone brake holds full load.
Submersible sealed contactor handles high amps and allows higher duty cycle.
Standard Compliance: CE Machinery Directive 2006/42/EC, CE EMC Directive 2004/108/EC, EN 14492-1:2006 Power Driven Winches and SAE J706.

Rated line pull: 3,630 kg / 8,000 lb (SAE J706 rating) | 3,560 kg (EN 14492-1 rating)
Motor: 1,940 w / 2.6 hp 24V series wound
Gear train: 3-stage planetary 211:1
Clutch (freespooling): Rotating ring gear
Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
Winch construction: Aluminum die cast housings with steel drum
Drum size: 90 x 205 mm (3.5” x 8.1″)
Rotation of winch: Wire rope shall be under-wound orientation only
Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
Mounting bolts pattern: 254 x 165 mm (10″ x 6.5″)
Wire rope recommended: * 10 mm x 22.6 m, 1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating. | * 3/8″ x 100′, EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
Winch weight (including rope) : 31 kg / 68.3 lb
Gross weight : 47 kg / 104 lb
Box dimension, (L x D x H) : 650 x 260 x 440 mm (25.6″ x 10.2″ x 17.3″)

Compliant with EN 14492-1 requirements for vehicle recovery winch:

The working coefficient for the first rope layer on the drum shall be at least 2.
The D/d ratio to the center of the rope shall be at least 10 for the drum.
Drum freeboard shall be at least 1.5 x rope diameter

WARNING